Click Image for Gallery
The TP-Link CPE510 is an outdoor wireless bridge designed for reliable long-distance point-to-point and point-to-multipoint connections. It's ideal for linking buildings, extending networks, and supporting surveillance or remote sites where cabling isn't practical.
Operating on the 5 GHz band, the CPE510 delivers stable, high-speed wireless performance with reduced interference compared to 2.4 GHz solutions. Its built-in directional antenna helps focus the signal, improving range and connection quality over extended distances.
Built for outdoor use, the CPE510 features a rugged, weather-resistant enclosure and supports Power over Ethernet for simple single-cable installation. Centralised management through TP-Link's Pharos Control platform makes it easy to configure and monitor deployments.
Features
- Built-in 13dBi 2x2 dual-polarised directional MIMO antenna
- Adjustable transmission power from 0 to 23dBm/200mw
- System-level optimizations for more than 15km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System - Pharos Control
- AP / Client / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
Kit Contents
- Outdoor Wireless CPE
- 24V 0.5A Passive PoE Adapter
- Pole Mounting Straps
- AC Power Cord
- Installation Guide
Manuals & Datasheet
Technical
| Hardware Features | |
|---|---|
| Processor | Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc |
| Memory | 64MB DDR2 RAM, 8MB Flash |
| Interface | 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button |
| Power Supply | Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC |
| Max. Power Consumption | 9.8 Watts Max |
| Dimensions (W x D x H) | 224 x 79 x 60mm |
| Antenna | Built-in 13dBi 2x2 Dual-polarised Directional Antenna Beam Width: 45° (H-Plane) / 45° (E-Plane) |
| Protection | 15KV ESD Protection 6KV Lightning Protection |
| Enclosure | Outdoor ASA stabilised plastic material IPX5 waterproof Certification |
| Wireless Features | |
| Wireless Standards | IEEE 802.11a/n (with Pharos MAXtream disabled) |
| Proprietary Protocol | TDMA Mode (with Pharos MAXtream enabled) |
| Wireless Speeds | Up to 300Mbps (40MHz, Dynamic) Up to 144.4Mbps (20MHz, Dynamic) Up to 72.2Mbps (10MHz, Dynamic) Up to 36.1Mbps (5MHz, Dynamic) |
| Frequency | 5.15 ~ 5.85GHz |
| Transmission Power | 26dBm/398mw (Adjustable power by 1dBm) |
| Software Features | |
| Wireless Configurations |
|
| Management Features |
|
| System Tools |
|
| System-Level Optimisations | Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog |
| PoE Adapter Features | |
| Dimensions (W x D x H) | 110 x 57 x 33.5mm |
| Interfaces | 1 AC Jack with Earth Ground 1 10/100Mbps Shielded Ethernet Port (Power + Data) 1 10/100Mbps Shielded Ethernet Port (Data) |
| Button | Remote Reset Button |
| Power Status LEDs | Green |
| Input | 100-240VAC, 50/60Hz |
| Output | 24VDC, 0.5A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) |
| Efficiency | >80% |
| Certifications | CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
| Other | |
| Certification | FCC, CE, RoHS, IPX5 |
| Package Content | Outdoor Wireless CPE 24V 0.5A Passive PoE Adapter Pole Mounting Straps AC Power Cord Installation Guide |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. |
| Environment | Operating Temperature: -40°C ~ 70°C (-40°F ~ 158°F) Storage Temperature: -40°C ~ 70°C (-40°F ~ 158°F) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5% ~ 90% non-condensing |