The Toonakit 2 is for swing gates with leaves up to 5 metres, made up of a surface mounted electromechanical gear motor.
The installation process is simple, and has a built in capacitor for any maintenance that is required. This is ideal for residential use, due to it's durability and resistance to all conditions. The internal moving parts are steel, with light alloys and technopolymers. The Toonakit has a generously sized and practical connection compartment, giving rapid and easy access to internal parts in the upper section of the motor.
Includes
- 2 x TO5016 Motors
- 2 x ON2E Remotes
- 1 x MC800 Control Panel
- 1 x EPM Pair of Bluebus Photocells
- 1 x OXI Receiver
| Electrical Data | |
| Absorption (A) | 1.5 |
| Motor Voltage | 230v |
| Power (W) | 340 |
| Gate Specifications | |
| Automation Type | Ram |
| Kit Type | Double |
| Performance Data | |
| Force (N) | 1800 |
| Speed (RPM) | 0.013 |
| Work Cycle (cycles/hour) | 22 |
| Working Temp. (°C Min/Max) | Working temp. (°C Min/Max) |
| Technical | |
| Protection Level (IP) | 44 |
Nice Toonakit 2 Gate Opener Kit (230v, 5m)
- Brand: Nice Automation
- Product Code: TOONAKIT 2
- Availability: Usually dispatched within 24 Hours *
Accessories
-50x50.png "Nice Era PPH2 Aluminium Photocell Post (1000mm)")
-50x50.png "Nice Era PPH3 Aluminium Photocell Post (500mm)")
- Total accessories: £0.0
- Grand total: £
Nice TO5016 Toona Replacement Arm
Nice TO5016 Toona Replacement Arm for Toona Kit 2 and 6 (Low Speed).FeaturesLimit switch on opening and closing For swing..
Nice Era One ON2E Remote Control
Nice Era One ON2E 2 channel remote control operating on 433.92 MHz rolling code, for use with Nice automation systems.Part of the Era One ra..
Nice OXI Receiver
Discontinued, replaced by Nice OXIBD BI-Directional Receiver.Nice OXI Receiver with connector, 433.92 MHz 4 Channels, without built-in trans..
Nice PLA10 Vertical Mount Electric Lock
A 12v vertical electric lock from the manufacturer Nice and is required for gates longer than 3m. ..
Nice PLA11 Horizontal Mount Electric Lock
A 12v horizontal electric lock from the manufacturer Nice and is required for gates longer than 3m. ..
Nice PLA6 250mm Long Rear Bracket
A 250mm rear bracket from Nice Automation, for the Toona4, Toona5 and Wingo5 swing gate motors and kits. ..
Nice PLA8 Screw Adjustable Front Bracket
A 250mm rear bracket from Nice Automation, for the Toona5 and Wingo5 swing gate motors and kits. ..
Nice Era EPM Medium Photocells
Mid size Era Relay synchronised photocell.This product is a suitable replacement for the discontinued Nice MOF Surface Mounted Photocells...
Nice Era EDSWG Wireless Keypad
The Nice Era EDSWG wireless keypad is for use with Nice automation systems only such as gates, garage doors, shutters, sunscreens and more. ..
-200x200.png "Nice Era PPH3 Aluminium Photocell Post (500mm)")
Nice Era PPH3 Aluminium Photocell Post (500mm)
Nice Era PPH3 Aluminium Post (500mm) The Nice Era PPH3 Photocell Post is a protective aluminium enclosure that houses 1 x Nice..
-200x200.png "Nice Era PPH2 Aluminium Photocell Post (1000mm)")
Nice Era PPH2 Aluminium Photocell Post (1000mm)
Nice Era PPH2 Aluminium Post (1000mm) Photocell PostsThe Nice Era PPH2 Photocell Post is a protective aluminium enclosure that houses 2x..
Nice PLA13 Mechanical Travel Stops
Nice PLA13 Mechanical Travel Stops for Closing and Opening Manoeuvres Please Note: The PLA13 is priced / sold as individual stops &..