Seip TS100 garage door opener for automating heavy horizontally tracked doors or sectional type doors up to 20′ wide. 

Features

• Low Power Consumption – Save energy by using a Seip door operator. Power consumption is only 2.3 watts in stand-by mode.
• Completely Maintenance Free – All models are equipped with an automatic chain tensioning system, keeping the chain tensioned continuously. The C-rail profile protects the chain from dust – no expensive maintenance calls.
• Quality – The C-rails and base-plates of our operators are made of 2mm galvanized steel. With the chain drive system we also provide approved quality – chains have been offering excellent reliability for decades.
• Soft-Start and Soft-Stop as standard – A feature originally introduced by Seip: by speeding up slowly and reducing the speed before every stop, noises caused by the garage door are reduced to a minimum or even eliminated.
• Automatic Force Measurement – This means that the required force for operating your door is precisely measured by the operator. Should it meet with an obstruction, it will automatically reverse direction. No fuss – no problem.
• Automatic Light – On each operation the internal automatic light becomes active. The 230v light can be adjusted to stay on between 80 to 240 seconds.
• Pull Force - 100kg
• Minimum Space above garage door - 35mm

Kit Contents

• 1 x TS100 Operator
• 2 x ‘Midi’ SKR433-3 remote controls
• 1 x Wall Push Button
• 1 x Low energy 7 Watt CFL courtesy lamp bulb
• 1 x Mounting brackets
• 1 x Fitted 13A mains plug
• 1 x Cable Operated Emergency Manual Release
• 1 x Installation Manual

Manuals & Datasheet

• Installation Manual for TS100