Click Image for Gallery
The FIBARO Smart Implant is a remote Z-Wave controller module that affords smart functionality for devices that are not Z-Wave compatible. Connect compatible binary / analog sensors to have them report their readings back to the FIBARO Home Center. Control devices by opening or closing the output contacts independently to the inputs.
Repeater Node
Repeater nodes transmit and receive data with the home centre relevant to their status, and also extend the reach of the mesh.
Features
- Compatible with any certified Z-Wave or Z-Wave Plus controller
- Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption
- Works as a Z-Wave signal repeater
- Allows for connecting sensors:
- 6 DS18B20 sensors
- 1 DHT sensor
- 2 2-wire analog sensor
- 2 3-wire analog sensor
- 2 binary sensors
- Built-in temperature sensor
Technical Specifications
| Power supply: | 9-30V DC ±10% |
|---|---|
| Inputs: | 2 0-10V or digital inputs 1 serial 1-wire input |
| Outputs: | 2 potential-free outputs |
| Supported digital sensors: | 6 DS18B20 or 1 DHT22 |
| Maximum current on outputs: | 150mA |
| Maximum voltage on outputs: | 30V DC / 20V AC ±5% |
| Built-in temperature sensor measurement range: | -55°C–126°C (-67°F–259°F) |
| Operating temperature: | 0–40°C (32–104°F) |
| Radio protocol: | Z-Wave (500 series chip) |
| Radio frequency: | 868.4 or 869.8 MHz EU; 908.4, 908.42 or 916.0 MHz US; 921.4 or 919.8 MHz ANZ; 869.0 MHz RU; |
| Radio transmit power: | max. 7 dBm (EIRP) |
| Range | Range: up to 50m (164 ft) outdoors up to 40m (131 ft) indoors (depending on terrain and building structure) |
| Dimensions: | (L x W x H): 29 x 18 x 13 mm |
| Compliance with EU directives: | RoHS 2011/65/EU RED 2014/53/EU |